-->
Hanna Nitrite Meter with Cal Check - LR  Ref: HI-93707
This instrument is equipped with Cal Check® validation function and standards to validate good performance at any time. Taking just a few short steps, the validation procedure is user-friendly and ensures that the meter is properly calibrated wherever you go. Hanna photometers use the exclusive ready-made, NiST traceable standards to verify the performance of the instrument and recalibrate if necessary.

Cuvets are constructed from specialized optical glass to ensure the best and most consistent results. The positive locking system ensures that the cuvet is in the same position every time it is placed into the measuring cell. Our sample cell is designed to fit a cuvet with a wide neck to make it easier to add both sample and reagents.

All instruments are factory calibrated and the electronic and optical design minimizes the need for frequent calibration. Ideal for field applications, these meters are splash proof and the lamp and filter units are protected from dust or dirt by a transparent barrier.


Parameter   Nitrite, Low Range
Range   0.000 to 0.600 mg/L(as NO²--N)
Accuracy   ±0.001 mg/L @ 0.100 mg/L
Filter   Narrow band @ 525 nm
Method   Adaptation of an EPA approved method. The reaction between Nitriteand the reagent causes a pink tint in the sample.
Environment   0 to 50°C (32 to 122°F); Max 95% RH non-condensing
Battery Type / Life   (1) 9V/approx. 200 hours continuous use
Auto Shut-off   After 10 min. of non-use in measurement mode
Dimensions   192 x 102 x 67 mm (7.6 x 4 x 2.6")
Weight   290 g (10 oz.)